V3 query with Sub Zero Mini Controller

Cantabile
1

Hi Guys, im using an Alesis V61 and Cantabile V3 with a “SubZeroMini” control surface (similar to a NanoKontrol). After i Bind the control surface fader to the volume it works fine, but when i first use it during playing, rather than it just lower or raise the volume, it will jump louder or softer to, i guess, where the physical fader was last left. This can mean sometimes during playing it will be way loud or way soft rather than just adjusting the level a little bit from where im playing. Is there a way of doing this better ?

Thanks,

Steve

2

Hi Steve,

On the bindings that are causing this you can adjust the setting of the “Prevent Jumps” setting to “Yes”

image
image1565×698 30.7 KB

This should correct the issue I hope.

Cheers,

Dave

1 Like
3

IMG_20240503_133020
IMG_20240503_1330201920×2560 452 KB

Hi Dave, thanks for the reply. Don’t know if that’s V4 you’ve got, but I found this setting. Will give it a go :+1:

1 Like
4

Hi Steve, yep, it’s V4 but you found the correct setting!

Dave

5

Yeah think so, was driving me nuts but seems to be working. Thanks for your help mate :slight_smile:

1 Like