TIP: AMPLITUBE 4 LESLIE SPEED CONTROL
For anyone using the Leslie in Amplitube, there seems to be a problem controlling the fast/slow speed. For myself, I tried in vain to use bindings with C3. Someone may prove me wrong, which is a good thing, but the parameters in this plug run several pages deep. I tried for several hours to use C3, and finally resigned to set a binding within the plug. I selected Cab A - Leslie - 122 for my demo. This is the lengthy process to achieve it.
First, select MIDI in the lower right hand corner.
Select Control Change
Select Preset. Then select “Add” at the bottom of the page. In this case I used the leslie 122 in Cab A. Select Cab A and the 122, which shows “speed”, and select.
Once speed is selected, this page appears.You then can use the “Learn” button at bottom left, or right-click CC# which will advance numbers with every click. I chose “1” which is the control for the Mod Wheel. Then hit the OK button at bottom right. All is well.
The only thing left to do is assign your controller stereo out to Amplitube stereo in. Also, make another assignment for your controller MIDI out to Amplitube MIDI in. I have this all saved in a rack for easy future use.